Showing posts with label Equipment. Show all posts
Showing posts with label Equipment. Show all posts

Monday, March 14, 2011

Sous Vide @ Home - Part 2

Alright so this post is long overdue but I only just got my own vacuum sealer last week so technically, my sous vide set up is only just now completed. A lot has been said about cooking sous vide. When the technique first came out in the 70s, it wasn't long before valid concerns over the stability of plastics in hot water and anaerobic bacteria propagation were raised. But we know a lot more about food safety now and food grade plastics are here to stay. There will be those who will always claim that charcoal stoves and wood fired ovens make the best food, and for specific dishes I will be among the first to agree, but seriously, can you do this without sous vide technology?

how gay is this?


That is a piece of USDA choice chuck eye roll. That's right, CHOICE. Not premium standard American beef and yes, CHUCK. But look at it. Perfectly medium from end to end and you know what? So tender that you can easily slice it with a butter knife. Sous vide cooking value adds. Full beef flavour of a tough cut with the tenderness of filet mignon without the slow cooking effect of drying out the meat. I can't think of ANY other way to get results like this.

So, in my case, sous vide cooking is literally meat in a plastic bag, a computer and a rice cooker but damn, the results are mind blowing.


I have used this set up to cook tender cuts and tough cuts of beef, lamb, chicken, fish, scallops, vegetables and even fruit! The results are consistent every single time. What varies is the finishing and I have learned several tough lessons, experiencing it the hard way. For example, searing something at room temperature, something fresh out of the fridge and something fresh out of sous vide, yields differing results. Common sense right? Well not for me...

pre-packed beef in my rice cooker with a resistance thermometer probe
Before I got my own vacuum sealer, I would get the cuts trimmed and pre-sealed and then do a quick marinate before finishing. I was also limited to cuts of meat ordered from my suppliers Now the possibilities are endless, I can save on marinades because vacuum marinating requires a fraction of the marinade and confits can be made hassle free. Perfectly poached scallops and salmon mi-cuit are easy peasy.
pre-sealed lamb shank and marinated chuck tender
I am completely sold on the sous vide technique. I believe it was Thomas Keller who said that sous vide doesn't take away the need to learn classical cooking techniques, it's just another option in a good cook's repertoire.




Monday, December 13, 2010

I Scream, You Scream, We All Scream For Ice Cream!

I got myself an ice cream machine. The final choices were the cuisinart ice-50bc and the venetto classic. I read somewhere that the cuisinart production has been discontinued (indicating a possbile lack of spare parts in the future) and when I tested the machine at the shop, it was really noisy. Those reasons and the $700 price tag made me go with the venetto.


First thing I made was an apple blackberry sorbet. I used my own standard recipe which gives pretty decent results as a frozen block blended with a hand blender before a JAM service. The results were pretty good, except that I didn't churn the mix long enough so after ripening in the freezer, the texture wasn't as smooth as it could have been due to the formation of larger ice crystals.


After that pretty successful run, I decided to try my hand at ice cream. There was no other way but the vanilla way. I'm not a big fan but I do believe that the best way to judge the quality of an ice cream label is by tasting it's vanilla flavour. I made a standard creme anglais custard I learned at the coriander leaf and churned it. I didn't have vanilla pods so I used extract. The texture was amazing but the lack of real pods really showed in the flavour of the ice cream, it was also a little too rich. Probably too much heavy cream.


I had anticipated this though and only churned half the custard. I loaded up the other half with a copious amount of Irish cream and churned it, curious to see just how the alcohol content would affect the texture. The results were stunning. The alcohol lowered the freezing point even further and after ripening overnight, the ice cream was incredibly smooth. The liqueur had tempered out the richness of the custard and because of the amount I added, putting a spoonful into your mouth immediately released a bold but pleasant alcohol 'cloud'. Unlike the alcoholic ice creams from Skinny Pizza which were a little overpowering, this recipe is definitely a keeper.

Irish Ice Cream & Chocolate Fondant

The next day I decided to try something a little more exciting and prepared some salted caramel. I increased the proportion of whole milk to heavy cream and at the last minute decided to go gelato style as a further experiment so corn flour instead of egg yolks were used to thicken the custard. The custard tasted awesome after being cooled down in the fridge but after churning, the caramel flavour became too prominent. I must have burned it a bit too much. The texture though was really nice and I think the gelato style works best for me. The egg yolks in Singapore have a really eggy smell even when they're fresh from the market and this flavour becomes detectable in the ice cream, something I personally don't like. Gelato it is.

In the churner right now, I'm trying out a barley gelato. No corn flour here, just really thick barley water sweetened with melon sugar. Adding some lemon juice to make lemon barley might make it a nice local flavour palate cleanser. Next up is a water chestnut sorbet :)

Will post a recipe for gelato once I get the proportions right.



Wednesday, December 8, 2010

Sous Vide @ Home - Part 1

So it's my birthday in 2 days and instead of studying thin films and quality control, I spent the day online, reading up on sous vide functional principles, looking for equipment online and getting in touch with my inner geek :) damn the things people do when they have too much time..

Because a thermomix is just too expensive right now ($2500, but if you think that's bad, a pacojet costs $6000), I decided that one last birthday treat was in order but couldn't decide on whether to get a high power food processor, an ice cream machine or a sousvide supreme. Getting any of them would contribute a lot in the kitchen and getting all would be swell but at an average price of $700 each, it wasn't going to happen.

The food processor was last on the wish list and while the sousvide supreme is a really nice toy, $800 for the set up, EXCLUDING the vacuum sealer, was just too much. So, I decided to buy the ice cream machine and a low end vacuum sealer and build my own sous vide rig. I am studying to be an engineer after all, may as well put all that tuition to some use :)

A sous vide set up requires 3 basic components. Something to hold the conducting liquid(water bath), something to heat the conducting liquid (incandescent light bulb or heating element from an old electric kettle) and most importantly something that makes sure the temperature stays the same by switching the heating element on and off (equipment with a feedback loop to control the heater). I studied the product reviews and as much online literature about sous vide machines and decided to use the sousvide supreme, convection circulated design as opposed to the open top, thermal immersion circulators I used at the brewery which cost abt US$1200 for just that small box (PID controller) at the top left of the picture below. Wish I had this now :(

Beer kept overnight at 19°C for daily testing

The convection design costs less because it requires less equipment, you depend on convection currents as opposed to pumps to circulate the water in your bath. My own rig will use an old school mechanical rice cooker as the bath and heating element. The heat coming from the bottom should also create good convection circulation of the conducting liquid. The rice cooker is well insulated and has a fitted cover that will help maintain the higher than ambient temperatures with less energy. On the flip side, cooling it down will also be harder.

I study materials science and not electrical engineering so all the circuit diagrams for the amplifiers and other feedback units we study are truncated to black boxes on our diagrams. In any case, Singapore doesn't have a 'radio shack' analogue and sourcing all the individual parts seemed like too much work to complete my home sous vide machine. Instead, I got a PID controller unit online and 2 sets of platinum resistive thermal device probes. I chose to use RTD probes because sous vide is a process that can take a long time, up to 72 hours in some recipes and this requires high long term accuracy. After a bit of research, I found the appropriate circuit diagrams and process codes here. Now all the GPA hammering shit from first and second year engineering, like C++ programming and electrical circuitry is reaping returns.

According to wikipedia, A proportional–integral–derivative controller (PID controller) is a generic control loop feedback mechanism (controller) widely used in industrial control systems – a PID is the most commonly used feedback controller. A PID controller calculates an "error" value as the difference between a measured process variable and a desired set point. The controller attempts to minimize the error by adjusting the process control inputs.

In essence, Proportional calculations set an initial or present platform to achieve the desired outcome. These are supplemented by the Integral calculations which using previous data, calculate feedback based on previous data and Derivative feedback are predictions worked out from current rates of change to ensure that the temperature stays constant to within 0.1°C with proper calibration. Compare this with a simple thermostat in an oven that switches on and off within a sinusoidal range of about 15°C peak amplitude.

I HATE math so I'm glad there're pre-written formulas from the circuit diagram site and that's why Man invented the computer, to do all that calculus :) $300, 4 hours and programming software courtesy of NTU later, I'm ready to rock and roll. This works out so much better than buying a sousvide supreme. By changing the size of the rice cooker, which costs less than $100, I can easily adjust the set up to sous vide items for 2 or 25 people in a snap. All this for less than half the price that the sousvide supreme is being sold at. I can already see myself cooking a 4kg ribeye sous vide and then searing the outside on the cooking plate I bought today.

Will update when I can, probably when the PID controller arrives. I hope this works! In the meantime, I will be reading up on this great free resource for sous vide cooking data.

Tuesday, April 1, 2008

Conventional vs Electric vs Induction

I'm talking about hobs here, conventional or radiant hobs being the oldest technology and induction cooktops being the new kid on the block.

Conventional hobs burn a fuel, usually liquefied petroleum gas which comes in the huge compressed cylinders delivered to your home by the friendly union gas or esso uncles or natural gas if your house is hooked up to the power gas network. I have 2 issues with gas hobs, the 1st being lack of control and the 2nd being the very fact that it isn't very environmentally friendly.

At home, I used to have problems because i could never get my griddle hot enough to sear my meat cuts properly, this is an extremely important step when preparing roasts and tataki dishes. I insisted on getting one of those high pressure zhi char burners when i moved to my new house but ended up burning most things to hell and back with it. At work, i had similar problems. If i wasn't burning the berries i was trying to saute, then i would definitely be toasting my arm while reaching for the pans on the inner burners. That's one reason why chef jackets are supposed to be long sleeved, to protect your forearm from radiant heat and spillage. I'll admit that it's probably my own lack of skill that results in the burning but that still doesn't change the fact that i cannot serve out burnt crap.


burning off the joy juice in a red wine reduction

My only experience with electric coil hobs was in Europe. I think they have the impression that piping or storing gas was a safety hazard and many places are so old that induction cookers weren't invented yet or perhaps too expensive to install. Anyway, the studio apartment i stayed in while in Munich was really tiny and the kitchenette which was by the door had 2 electric hot plates which took forever to heat up. Boiling water soon followed this routine, i'd get up from bed and crank the hot plate to max, fill a pot of water, put it on, have a bottle of weissbier dunkel then proceed to take a dump. After which, my water would just be coming on to a gentle boil. Magnificent... Well, i got used to it after a while and churned out some pretty decent dishes.


mushroom ragout with freshly grated parmagiano


pork schnitzel, potato mousseline and rucola aglio olio


truffled eggs


hokkien mee


I had to sms my best friend all the way back in Singapore to ask him if hokkien mee had bean sprouts because i forgot. Turns out that there are bean sprouts in the dish but i left them out because they cost a whopping 5.50 Euro a kg there which is more than a hundred times the price here at home.

Finally we come to induction hobs. This is without a doubt the kitchen technology of tomorrow. When choosing hobs for the kitchen at the Screening Room, i saw a demonstration of a commercial induction hob bring 3 litres of water to a full boil in less than 5 minutes. I swear, it was love at first sight. The efficiency of induction hobs is also unparalleled, not only does it use electricity that can be generated from renewable sources, it can also be up to 84% efficient as compared to gas burners which are only about 40% efficient.


So what makes this baby tick? Here comes the good part, as an undergraduate reading materials science, i can say the following with great authority ;). The underlying principle of induction cooking is magnetic hysteresis. An induction cooker element is basically a high power, high frequency electromagnet that generates a finely tuned electromagnetic field in the region of space surrounding it(1). When a ferromagnetic cooking vessel is placed in this field, heat energy is induced in the vessel through hysteresis which is a measure of resistance of a material to magnetization(2). It's basically the same concept as an electric heating coil but induction cooking uses magnetic resistance instead of electrical resistance to generate heat. The heat created is transfered to the contents of the vessel(3) and nothing outside the vessel is affect by the field(4).

This results in a few noteworthy points:
- Heat changes are instantaneous making induction settings very precise.

- The heat is generated in the cooking vessel itself and hence the hob only gets as hot as the pot.

- Only ferromagnetic materials can be used on induction cookers i.e. cast iron, some stainless steels and a few magnetic ceramic materials. Pyrex, aluminium and copper cannot be used.

- Nothing outside the vessel is affected by the field. This implies cool stovetops and cooler kitchens. No more sweat dripping into your food!




The loss of an open flame does mean that you lose ability to char foods but this can be done in an oven. As for Asian dishes that need the 'wok hei' like fried rice and hor fun, my personal solution would be to have a seperate standalone zhi char burner specifically for that.

I only know of one restaurant that uses induction hobs and that is in the Western kitchen at the Top Table at the Temasek Culinary Academy. They chose induction for safety reasons.

The Top Table

Temasek Culinary Academy
Block 31, Level 3

Operating Hours
Weekdays (During term time): 11.30am - 2.00pm (last order)
Saturday, Sundays, Public Holidays, Vacation, Test and Exam Period: Closed

Phew.. What a hell load of typing that was.

Till next time!